Samsung Gas Hob Burner GN642FFXD User Manual

  • Post last modified:April 30, 2023
  • Post category:Samsung


Samsung Gas Hob Burner GN642FFXD



Thank you for using our appliance. To use this appliance correctly and prevent any potential risk, read these instructions before use the appliance. Keep these instructions at the place where you can find it easily. If you are unsure of any of the information contained in these instructions, please contact the Samsung customer care center. These instructions are only valid for the countries of destination, the identification symbols which are indicated on the cover of the instruction manual. The manufacturer shall not be responsible for any damages to persons or property caused by incorrect installation or use of the appliance. The appliance has been certified for use in countries other than those stated on the appliance. The manufacturer also reserves the right to make any modifications to the products as may be considered necessary or useful, also in the interests of the user, without jeopardizing the main functional and safety features of the products themselves.

Safety Warning

  • Your safety is the utmost importance to Samsung.
  • You must read warnings carefully before installing or using the appliance.
  • This instruction booklet must be kept with the appliance for any future reference. If the appliance is sold or transferred to another person, ensure the booklet is passed on to the new user.
  • The manufacturer declines any liability should these safety measures not be observed.
  • The following marks are made to be easily understood so that you can prevent any safety accident caused by misuse in advance and use the appliance more conveniently.
  • Completely understand the following contents before read the instruction.

Samsung-Gas-Hob-Burner-GN642FFXD-3 Danger/Warning: If this mark is neglected, the user may be dead or seriously injured.
Samsung-Gas-Hob-Burner-GN642FFXD-3Caution: If this mark is neglected, the user may be injured or damaged in property.

The following marks mean as follow:
Samsung-Gas-Hob-Burner-GN642FFXD-3 General Danger, Warning and Caution

Samsung-Gas-Hob-Burner-GN642FFXD-4 No Access

Samsung-Gas-Hob-Burner-GN642FFXD-5 No Fire Tool

Samsung-Gas-Hob-Burner-GN642FFXD-6 Must Do

Samsung-Gas-Hob-Burner-GN642FFXD-3 Danger
If gas seems to leak, take the actions as follow :

  • Do not turn on the light.
  • Do not switch on/off any electrical appliance and do not touch any electric plug.
  • Do not use a telephone.
  • Stop using the product and close the middle valve.
  • Open the window to ventilate.
  • Contact our service center by using a phone outside.


The fuel gas contains mercaptan, so that you can feel that the gas leaks even where only 1/1000 of the gas exists in the air with specific smell (smell of rotten garlic or egg).


Samsung-Gas-Hob-Burner-GN642FFXD-6 Warning


Samsung-Gas-Hob-Burner-GN642FFXD-3 Caution

  • This appliance should be installed by a qualified technician or installer.
  • The adjustment conditions for this appliance are stated on the label or data plate.
  • After unpacking the appliance, make sure the product is not damaged and that the connection cord is in perfect condition. Otherwise, contact the dealer before installing the appliance.
  • The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85˚C above the ambient temperature of the room it is located in, whilst in use.
  • Remove all packaging before using the appliance.
  • In the event of burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite the burner for at least one minute.
  • The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
  • Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.
  • Precisely observe the evacuation of combustion products.

Child and People Safety

Samsung-Gas-Hob-Burner-GN642FFXD-3 Warning


Samsung-Gas-Hob-Burner-GN642FFXD-6 Caution:

  • This appliance is designed to be operated by adults.
  • Children can also injure themselves by pulling pans or pots off the appliance.
  • This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safety without supervision or instruction by a responsible
    person to ensure that they can use the appliance safety.

During Use

Samsung-Gas-Hob-Burner-GN642FFXD-3 Warning: 



During Use (Continued)

Samsung-Gas-Hob-Burner-GN642FFXD-6 Warning: 


Samsung-Gas-Hob-Burner-GN642FFXD-3 Caution:

  • This appliance is intended for domestic cooking only. It is not designed for commercial or industrial purposes.
  • Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or increasing the level of mechanical ventilation where present.
  • Use heat-resistant pot holders or gloves when handing hot pots and pans.
  • Take care not to let pot holders or gloves get damp or wet, as this causes heat to transfer through the material quicker with the risk of burning yourself.
  • Only ever use the burners after placing pots and pans on them. Do not heat up any empty pots or pans.
  • Never use plastic or aluminium foil dishes on the appliance.
  • When using other electrical appliances, ensure the cable does not come into contact with the appliance surfaces of the cooking appliance.
  • If you have any mechanical substance such as artificial heart and etc in your body, consult with a doctor before using the appliance.
  • Do not let pot holders come near open flames when lifting cookware.
  • Do not use a towel or other bulky cloth in place of a pot holder. Such cloths can catch fire on a hot burner.
  • When using glass cookware, make sure it is designed for top plate cooking.
  • To minimize the possibility of burns, ignition of flammable materials and spillage, turn cookware handles toward the side or center of the top plate without extending over adjacent burners.
  • Always turn burner controls off before removing cookware.
  • Carefully watch foods being fried at a high flame setting.
  • Always heat fat slowly and watch as it heats.
  • Foods for frying should be as dry as possible. Frost on frozen foods or moisture on fresh foods can cause hot fat to bubble up and over the sides of the pan.
  • Never try to move a pan of hot fat, especially a deep fat fryer. Wait until the fat is \ cool.

Cleaning & Service

Samsung-Gas-Hob-Burner-GN642FFXD-6 Warning: 


Caution: Before attempting to clean the appliance, it should be disconnected from the mains and cool. You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.

Environmental Information

  • After installation, please dispose of the packaging with due regard to safety and the environment.
  • When disposing of an old appliance, make it unusable, by cutting off the cable.
    Samsung-S-Charger-Vehicle-Dock-EBHN910I-14 Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
  • This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
  • Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
  • Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.


Description of the appliance




Burner (Auxiliary, Semi-rapid and Rapid)


  1. Top Plate
  2. Auxiliary Burner
  3. Semi-rapid Burner
  4. Rapid Burner
  5. Control handle for rear left burner (Rapid burner)
  6. Control handle for front left burner (Auxiliary burner)
  7. Control handle for front right burner (Semi-rapid burner)
  8. Control handle for rear right burner (Semi-rapid burner)
  9. Pan support
  10. Connection Cord
  11. Control handle
  12. Sealing ring
  13. Tap
  14. Burner lid
  15. Flame Spreader
  16. Burner Cup
  17. Injector
  18. Ignition Electrode
  19. Flame supervision device

How to Use the Appliance

Turn on

Preparation The following symbols will appear on the control panel, next to each control handle :


  • The minimum setting is at the end of the anti-clockwise rotation of the control handle.
  • All operation positions must be selected between the maximum and minimum position.
  • The symbol on the control panel, next to the control handle will indicate which burner it operates.

Ignition & Adjustment


  • Open the middle valve.
  • Place a pot or a pan on the corresponding cooking position.
  • Fully press down the control handle for the corresponding cooking position and turn it to the left, to the ignition position, and hold it there for a few seconds at most until the burner ignites.
  • After igniting, keep the control handle pressed for about 5~8seconds more because the heat sensor that opens the gas channel has to warm up first. And set control handle to the position you want.
  • If the burner does not light, repeat the process.
  • The flame size can be set continuously between maximum and minimum by slowing turning the control handle.
  • Samsung-Gas-Hob-Burner-GN642FFXD-3 If the igniters are dirty, this makes the burner harder to light, so you should keep them as clean as possible. Do this with a small brush and make sure that the ignition device is not hit or knocked violently.
  • The flame supervision device shall not be operated for more than 15s. If after 15s the burner has not lit, stop operating the device and open the compartment door and/or wait at least 1min before attempting a further ignition of the burner.

How to Use the Appliance (Continued)

Turn OFF



  • Turn the control handle to clockwise, to setting ‘O’ (off position)
  • Close the middle valve.

Samsung-Gas-Hob-Burner-GN642FFXD-3 Right after extinguishment, the appliance is still hot. Be careful not to be burned.

Samsung-Gas-Hob-Burner-GN642FFXD-6 This appliance is fitted with a Flame supervision device which cuts off the supply of gas to a burner if the flame goes out, for example if food has boiled over, or if there was a sudden draught.
In the event of the burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite the burner for at least 1min.

Safety and Energy saving advice

The diameter of the bottom of the pan should correspond to that of the burner.

Φ min. Φ max.
Rapid 200mm 260mm
Semi-Rapid 130mm 180mm
Auxiliary 100mm 120mm

Samsung-Gas-Hob-Burner-GN642FFXD-3 User can’t use cooking pan on the hotplate that overlap its edge.


  • Samsung-Gas-Hob-Burner-GN642FFXD-3 It is not permitted to use roasting pans, frying pans or grill stones heated simultaneously by several burners because the resulting heat build-up may damage the appliance.
  • Do not touch the hob top and pan support while using or for a certain period after using.

Samsung-Gas-Hob-Burner-GN642FFXD-6 As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.

Cleaning and Maintenance

  • Samsung-Gas-Hob-Burner-GN642FFXD-3 Cleaning operations must only be carried out when the appliance is cool.
  • The appliance should be disconnected from your mains supply before commencing any cleaning process.
  • Clean the appliance regularly, preferably after each use.
  • Abrasive cleaners or sharp objects will damage the appliance surface; you should clean it using water and a little washing up liquid.


Pan support, Control handles

  • Take off the pan supports.
  • Clean these and the control handles with a damp cloth, washing up liquid and warm water. Stubborn soiling is best soaked before.
  • Finally dry everything with a clean soft cloth.

Top plate

  • Regularly wipe over the top plate using a soft cloth well wrung out in warm water to which a little washing up liquid has been added.
  • Dry the top plate thoroughly after cleaning.
  • Thoroughly remove salty foods or liquids from the hob as soon as possible to avoid the risk of corrosion.
  • Stainless steel parts of the appliance may become discolored over time. This is normal because of the high temperatures. Each time the appliance is used these parts should be cleaned with a product that is suitable for stainless steel.

Cleaning and Maintenance (Continued)


  • Remove the burner lids and Flame Spreaders by pulling them upwards and away from the top plate.
  • Soak them in hot water and a little detergent.
  • After cleaning and washing them, wipe and dry them carefully. Make sure that the flame holes are clean and completely dry.
  • Wipe the fixed parts of the burner cup with a damp cloth and dry afterwards.
  • Gently wipe the Ignition device and flame supervision device with a well wrung out
    cloth and wipe dry with a clean cloth.
  • Before placing the burners back on the top plate, make sure that the injector is not blocked.

Re-assemble the Auxiliary, Semi-Rapid and Rapid burners as follows :


  1. Place the flame spreader (15) on to the burner cup (16) so that the ignition device and the flame supervision device extend through their respective holes in the flame spreader. The flame spreader must click into place correctly.
  2. Replace the burner lid (14) ensuring that the locating tabs fit into the noches in the flame spreader (15).

Replace parts in the correct order after cleaning.
Do not mix up the top and bottom. The locating lugs must fit exactly into the notches.


Repairs to the gas and electrical components of this appliance must only be carried out by a suitably qualified and competent person to ensure safety. However, some minor problems can be resolved as follows :

Problem Probable cause Solution
Not ignited No Spark. Check the electricity supply
The burner lid is badly assembled. Assemble the lid correctly.
The middle valve is closed. Open the middle valve completely.
Badly ignited The middle valve is incompletely opened. Open the middle valve completely.
The burner lid is badly assembled. Assemble the lid correctly.
The ignition plug is contaminated with alien substance. Wipe such alien substance with dried clothing.
The burners are wet. Dry the burners lids carefully.
The holes in the flame spreader are clogged. Clean the flame spreader.
Noise made when combusted and ignited The burner lid is badly assembled. Assemble the burner lid correctly.
Fire off while using The flame supervision device is contaminated with alien substance. Clean the flame supervision device.
Yellow Flame The holes in the flame spreader are clogged. Clean the flame spreader.
Different gas is used. Check the gas used.
Unstable Flame The burner lid is badly assembled. Assemble the burner lid correctly.
Gas Smell A gas tap has been left on. Check to see if any gas taps are on.
There may be a leak between the coupling and the gas bottle. Make sure that the connection is airtight.

If problem is not solved, please contact the Samsung customer care center.

Application for Service

If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center.

Region Country Customer Care Center (TEL) Web Site FAX no. Address Remark





















BELGIUM 02 201 2418 www. N/A Samsung Electronics Benelux B.V. Medialaan 50, 1800 Vilvoorde, Belgium
CZECH REPUBLIC 844 000 844 www. N/A Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK 70 70 19 70 www. N/A Samsung Electronics Nordic AB

SE -19427 Kanalvägen 10A, Upplands Väsby, Sweden

FINLAND 030-6227 515 www. N/A Samsung Electronics Nordic AB

SE -19427 Kanalvägen 10A, Upplands Väsby, Sweden



3260 SAMSUNG or

08 25 08 65 65

(€ 0,15/Min)

www. 01 48

63 06 38

Samsung Service Consommateurs

66 rue des Vanesses BP 50116 – Villepinte -95950 ROISSY cedex, France



01805 – 121213

(€ 0,14/Min)

www. 01805 –


Samsung Electronics GmbH

Samsung House, Am Kronberger Hang 6, 65824 Schwalbach/Ts., Deutschland

HUNGARY 06-80-SAMSUNG (7267864) www. N/A Samsung Electronics Magyar Rt.

Szépvölgyi Business Park, 1037 Budapest, Szépvölgyi út 35-37

ITALIA 800-SAMSUNG (7267864) www. 02


Samsung Electronics Italia S.p.A

Via C. Donat Cattin, 5, 20063, Cernusco Sul Naviglio (MI)

LUXEMBURG 02 261 03 710 www. N/A Samsung Electronics Benelux B.V. Medialaan 50, 1800 VilvoordeBelgium
NETHERLANDS 0900 20 200 88

(€ 0,10/Min)

www. N/A Samsung Electronics Benelux B.V. Postbus 681 2600AR Delft Nederland
NORWAY 815-56 480 www. N/A Samsung Electronics Nordic AB

SE -19427 Kanalvägen 10A, Upplands Väsby, Sweden

POLAND 0 801 801 881 www. +48-22-

607 4448

Samsung Electronics Polska sp. Z o.o.

Dział Obsługi Klienta02-678 Warszawa; ul. Szturmowa 2a


Rua Cesario Verde, no 5-4, Piso2795-753 Queijas-Portugal

SLOVAKIA 0800-SAMSUNG (726786) www. N/A N/A



902 10 11 30




Ciencies, 55-65 (Polígono Pedrosa)


SWEDEN 0771-400 200 www. N/A Samsung Electronics Nordic AB

SE -19427 Kanalvägen 10A, Upplands Väsby, Sweden



www. 0870


Samsung Electronics U.K. Ltd. Customer Care Centre PO Box 17243 Edinburgh, EH11 4YB United Kingdom
Republic of Ireland 0818 717 100 www. +44 (0)870


Switzerland 0800-SAMSUNG (7267864) http://www. N/A







RUSSIA 8-800-200-0400 www. +7-495-


117545 Россия, Москва, ул. Дорожная, д.3, корп. 6
KAZAHSTAN 8-800-080-1188 www. +7 (3272)


050051 4th floor, 172 Dostyk Ave. Almaty Republic of Kazakhstan
UZBEKISTAN 8-800-120-0400 www. +998-71-


100-742 12fl.,International Business Center,107B,Amir Temur str., Tashkent,Uzbekistan
UKRAINE 8-800-502-0000 www. +380 (44)

537 59 48

30A, Spaska St, Floor 3, Kiev 04070, Ukraine
LITHUANIA 8-800-77777 www. +370 52

139 770

Zemaites 21, Vilnius, LT-2009, Lithuania
LATVIA 800-7267 com/lv/index.htm +371 7

50 84 80

J. Alunana 2, Riga, LV-1340, Latvia
ESTONIA 800-7267 www.




Asia Pacific

AUSTRALIA 1300 362 603 www. (612)

9763 5750

Samsung Electronics Australia

7 Parkview Drive, Homebush Bay NSW 2127





www. 03-


Samsung Malaysia Electronics Sdn. Bhd.

3B-1-1. Level 1, Block 3B, Plaza Sentral, Jalan Stesen Sentral 5, KL Sentral , 50470, Kuala Lumpur, Malaysia















Thai Samsung Electronics Co.,Ltd Service Department 1,6 floor Boonmitr Building 138 Silom Rd., Suriyawong Bangrak Bangkok 10500
บริษัท ไทยซัมซุงอิเล็คโทรนิคส์ จำกัด

เลขที่ 138 อาคารบุญมิตร ชั้น 1,6 ถนนสีลม แขวงสุริยวงศ์ เขตบางรัก กรุงเทพฯ 10500

Technical instructions

  • Samsung-Gas-Hob-Burner-GN642FFXD-3 This appliance must be installed by a qualified technician or installer.
  • Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.
  • The adjustment conditions for this appliance are stated on the label (or data plate).
  • This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.
  • Before installing, turn off the gas and electricity supply to the appliance.
  • All appliances containing any electrical components must be earthed.
  • Ensure that the gas pipe and electrical cable are installed in such a way that they do not touch any parts of the appliance which become hot.
  • Gas pipe or connector shouldn’t be bent or blocked by any other appliances.
  • Check the dimensions of the appliance as well as the dimensions of the gap to be cut in the kitchen unit.
  • The panels located above the work surface, directly next to the appliance, must be made of non-flammable material. Both the stratified surfacing and the glue used to secure it should be heat resistant, to prevent deterioration.
  • Turn on appliance tap and light each burners. Check for a clear blue flame without yellow tipping. If burners shows any abnormalities check the following :
    • Burner lid on correctly
    • Flame spreader positioned correctly
    • Burner vertically aligned with injector nipple
  • A full operational test and a test for possible leakages must be carried out by the fitter after installation.
  • The flexible tube shall be fitted in such a way that it cannot come into contact with a moveable part of the housing unit and does not pass through any space susceptible of becoming congested.

Engineers technical data

Appliance Specification



Cat. II 2E+3+ II 2H3+ II 2E3B/P
P(mbar) 20/25 – 28-30/37 20 – 28-30/37 20-36
Cat. II 2H3B/P
P(mbar) 25-30



  • This appliance is to be built into a kitchen unit or 600mm worktop, providing the following minimum distances are allowed ;
    • The edge of the appliance must be a minimum distance of 55mm from a rear wall.
    • A minimum distance of 100mm must be left between the side edges of the appliance and any adjacent cabinets or walls.
    • The minimum distance combustible material can be fitted above the appliance in line with the edges of the appliance is 400mm. If it is fitted below 400mm a space of 50mm must be allowed from the edges of the appliance.
    • The minimum distance combustible material can be fitted directly above the appliance is 700mm.


This panel(a) must be positioned at a maximum distance of 150mm below the worktop.

Installing the appliance

  1. Remove the pan support, the burner lid and flame spreader and carefully turn the appliance upside down and place it on a cushioned mat. Take care that the Ignition devices and flame supervision devices are not damaged in this operation.
  2. Apply the sealing strip provided around the edge of the appliance.
  3. Do not leave a gap in the sealing agent or overlap the thickness.


Samsung-Gas-Hob-Burner-GN642FFXD-3 Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the appliance from the aperture in future, particularly if it needs to be serviced.

  1. Place the bracket(B) over the holes that match the size of the screws. There are one set of screw holes in each corner of the hob(H). Slightly tighten a screw(C) through the bracket(B) so that the bracket is attached to the hob, but so that you can still adjust the position it.
  2. Carefully turn the hob back over and then gently lower it into the aperture hole that you have cut out.
  3. On the underneath of the hob, adjust the brackets into a position that is suitable for your worktop. Then fully tighten the screws(C) to secure the hob into position.


Gas Connection

  • This appliance must be installed and connected in accordance with installation regulations in force in the country in which the appliance is to be used.
  • This appliance is supplied to run on natural gas only and cannot be used on any other type of gas without modification. Conversion for use on LPG and other gases must only be undertaken by a qualified person.

The gas inlet connection fitting is 1/2 inch female thread. Gas distributed by pipe ; natural gas, propane-air gas or butane-air gas For your safety, you must choose from the three following connection option.

  • Connection with a rigid pipe made from copper and with screw-on mechanical connectors. Make the connection directly to the end of the elbow fitted on the appliance.
  • Connection using flexible undulated metal tube with screw-on connectors. (Fig. A) You can use a flexible stainless steel pipe available from your after sales service department.
  • Connection using flexible tube with screw-on connectors. (Fig.B) These tubes must not exceed 2 meters in length and must be accessible along their entire length.


Gas supplied by tank or cylinder (butane/propane)

  • For the user’s safety, we advise the connection to be made with a rigid pipe if this is possible, using a flexible undulated metal tube with screw-on connectors (maximum length 2meters) (Fig.A)
  • For an existing installation, where it is not possible to fit a reinforced, braided, flexible gas hose, the connection can be made with a flexible gas hose (maximum length 2meters), with two clamps. One on the connector, and the other on the pressure regulator, and a gasket should be fitted between the connector and the hob’s elbow. (Fig.B)


  • Samsung-Gas-Hob-Burner-GN642FFXD-3 You can obtain the connector and the gasket from your After-Sales Service. In France, you must use a tube or a pipe featuring the “NF Gaz” logo. If the installation is difficult, unscrew the Elbow slightly and tighten it after locating the Elbow.
  • Samsung-Gas-Hob-Burner-GN642FFXD-6 A full operational test and a test for possible leakages must be carried out
    by the fitter after installation. (such as soap water or gas detector)
  • Access to the whole length of the connection hose must be possible and the gas hose must be replaced before its use before the end of service life (indicated on the hose).

Electrical Connection

This appliance must be earthed.
This appliance is designed to be connected to a 220~240V, 50/60Hz AC electricity supply. The wires in the mains lead are coloured in accordance with the following code ;
Green/yellow = Earth
Blue = Neutral
Brown = Live

The wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E or by the earth symbol.



Gas Conversion

  • Samsung-Gas-Hob-Burner-GN642FFXD-3 Be careful, the operations and adjustments to be carried out when converting from one gas to another.
  • All work must be carried out by a qualified technician.
  • Before you begin, turn off the gas and electricity supply to the appliance.


  • Samsung-Gas-Hob-Burner-GN642FFXD-3 Do not dismantle the tap shaft : in the event of a malfunction, change the whole tap.
  • Before placing the burners back on the top place, make sure that the injector is not blocked.
  • A full operational test and a test for possible leakages must be carried out after gas conversion. (such as soap water or gas detector)
  • After completing conversion, a qualified technician or installer has to mark “V” on the right gas category to match with the setting in rating plate. Remove the previous setting “V” mark.


Burner Features

Nominal heat input and flow rates see below at 15˚C at 1,013 mbar. (Table 1)





BURNER Rapid Semi-rapid Auxiliary  


POSITION Max Min Max Min Max Min


29 mbar

Injector make (1/100 mm) 85 65 50
Nominal heat input (Kw) 3.0 0.78 1.75 0.49 1.0 0.4 7.5
Nominal flow rates (g/h) 216 53 125 33 74 28





36 mbar

Injector make (1/100 mm) 80 62 47
Nominal heat input (Kw) 3.0 0.88 1.75 0.52 1.0 0.42 7.5
Nominal flow rates (g/h) 216 61 127 36 71 28


37 mbar

Injector make (1/100 mm) 85 65 50
Nominal heat input (Kw) 3.0 0.77 1.75 0.47 1.0 0.39 7.5
Nominal flow rates (g/h) 211 51 123 32 70 27


20 mbar

Injector make (1/100 mm) 119 97 72
Nominal heat rating (Kw) 3.0 0.69 1.75 0.55 1.0 0.38 7.5
Nominal flow rating (ℓ/h) 286 64 168 52 96 36





25 mbar

Injector make (1/100 mm) 110 91 68
Nominal heat input (Kw) 3.0 0.78 1.75 0.6 1.0 0.43 7.5
Nominal flow rates (ℓ/h) 285 71 167 57 95 39
Burner Calibrated orifice 1/100mm
Auxiliary 31
Semi-rapid 34
Rapid 43

Aeration adjustment none

Leave a Reply