Wireless Charging Cradle WCD-100 User Manual

  • Post last modified:April 30, 2023
  • Post category:LG


Wireless Charging Cradle WCD-100 User Manual

Wireless Charging Cradle WCD-100 featured img

All rights reserved.
LG Electronics Inc., 2014

Note: For optimal performance and to prevent any damage to, or misuse of the WCD-100, please read all of the information carefully before using the WCD-100.

Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc..

Included in the Package

Wireless Charging Cradle WCD-100 img 1

* These items could be changed or excluded as it may chance.

Description of Parts

Wireless Charging Cradle WCD-100 img 2

How to Use


Wireless Charging Cradle WCD-100 img 3

– Connect the USB cable to the power adapter and plug it into an electrical socket.


The Wireless Charger is turned on whenever it’s plugged in to a power adapter. There’s no separate on-off switch. Whenever you want to charge your phone, position it on top of the connected charger like this:Wireless Charging Cradle WCD-100 img 4

When your handset is placed in the correct position, it starts charging.
To check charging status, look at your phone. If the phone’s asleep, touch the Power/Lock key to wake it up.
NOTE: Use only the power adapter and Micro USB cable that come with WCD-100.
Using a different power adapter may damage your phone or reduce charging efficiency. WCD-100 is optimized for G3 may not be compatible with some phones.


– Do not drop the Wireless Charging Pad from high places.
– Do not modify, repair, or take the Wireless Charging Pad apart.
– Do not clean with water alcohol or benzene.
– Keep the Wireless Charging Pad away from humidity and dust.
– Do not place heavy objects on the Wireless Charging Pad.
– Do not place sharp objects near or on the Wireless Charging Pad.
– Keep Wireless Charging Pad away from any liquids, moisture or creams.
– Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.



Input / Output

DC 5V, 1800mA / DC 5V, 1000mA

Charging time

< 6 hours (Based on 3000mAh Battery)

Operation temperature

-10°C ~ 60°C


100mm(L) X 70mm(W) X 14.7mm(H), 88g

Declaration of Confirmation

FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference and
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.

Hereby, LG Electronics Inc. declares that the WCD-100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Safety Instructions

– When disconnecting the power adapter, always remove with the plug, do not pull the wire by itself.
– Never handle the power adapter with wet hands, as this could cause fire or electric shock.
– Refer servicing to qualified personnel only.
– Do not open the housing
– Do not twist or pinch the USB cable while connected to the power adapter. If the USB cable or power adapter need to be replaced, ensure that they comply with the manufacturer’s recommendation.
– Unplug the device during lighting storms and when unused for extended periods of time.

When using an electrical device, especially when children are present, basic safety precautions should always be followed, including the following:

DANGER to reduce the risk of electric shock
– Always unplug the device from the electrical outlet before cleaning.
– Do not reach for a device that has fallen into water. Unplug it immediately.
– Do not place or store device where it can fall or be pulled into a tub or sink.
– Do not place in or drop into water or other liquid.

WARNING to reduce the risk of burns, fire, electric shock or injury to persons
– Do not use with extension cord.
– Children should be closely supervised to ensure that they do not play with the device.
– Use this device only for its intended use as described in this manual. Do not use with unauthorized accessories of devices.
– Never operate this device if it has a damaged cord, plug, cable or housing. If it is not working properly, if it has been dropped or damaged, return it to the LG Service Center for examination and repair.
– Keep cord away from heated surfaces.
– This device is designed for indoor use only. Do not use outdoors.
– Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents.
– Please do not put any metal substance like coin when charging. It can cause product damage and serious burns.

Contact office for compliance of this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands

Leave a Reply