• Post last modified:April 30, 2023
  • Post category:LG




Overview and Specifications


  1. The Infotainment system provides Infotainment in your car, using the latest technology. See your dealer to have the system or software updated and upgraded.
  2. The Infotainment system can play the USB storage device or iPod/iPhone products.
  3. The Bluetooth phone connection function allows for the use of wireless hands-free
    Phone calls, as well as a phone music player. In addition, the WiFi function is provided.

Specifications Product

Item Categories Specifications



Model I17S
Dimensions Refer to image
Weight 1.16kg
Power source DC 12V
Operational temperature range -40 ℃ ~ 85 ℃

Basic Design Concept

Silver box: 180mm x 172.5mm x 60mm ( Weight : 1.16kg)


RF specifications

[ BT ]

Item Specifications Unit
Frequency 2402-2480 MHz
Modulation Type GFSK, π/4 DQPSK, 8 DPSK
BT Power 4 (BT Class2) dBm
Data rate 1 ~ 3 Mbps
Channel spacing 1 MHz
BT version BT4.2 + EDR

(BT LE was disabled by software)


[ Wi-Fi ]

Item Specifications Unit
Standard IEEE 802.11 a/b/g/n/ac
Frequency 2.4G 2412-2462 MHz
5G 5180 ~ 5825 MHz
Bandwidth 20 / 40 / 80 MHz




Data rate



802.11 b 20M 1, 2, 5.5, 11 Mbps
802.11 g 20M 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11 n 20M 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps




802.11 a 20M 6,9,12,18,24,36,48,54 Mbps
802.11 n 20M 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
802.11 n 40M 13.5, 27, 40.5, 54, 81, 108, 121.5, 135 Mbps
802.11 ac 20M 6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 78 Mbps
802.11 ac 40M 13.5, 27, 40.5, 54, 81, 108, 121.5, 135

162, 180

802.11 ac 80M 29.3, 58.5, 87.8, 117, 175.5, 234

263.3, 292.5, 351, 390

Modulation DSSS, BPSK,

16-QAM, 64-QAM, 256-QAM

Mode AP, Station, AP and station




M3.5 x 8.0mm, Machine Screw, 5ea


No. Part Material
1 Top case ADC12
2 Bottom Case ADC12
3 Antenna Cover PC+ABS
4 Shield Can Top inner NSP C7701 t=0.2
5 Shield Can Top outer NSP C7701 t=0.2
6 Shield Can

Bottom inner

NSP C7701 t=0.2
7 Shield Can Bottom outer NSP C7701 t=0.2
8 PCB PCB ( Epoxy , T=1.6 )
9 etc. Screws, Clip, Sheets



Major controls of Info3.5C

  1. SWC Control Area
    1. Right side of IPC display
    2. Head Up Display
  2. MFC Control Area
    1. Entire ICS display
  3. Touch Control Area
    1. Left side of IPC display
    2. Entire ICS display








  1. Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations. To promote safety, certain functions are disabled unless the parking brake is on.
  2. To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
  3. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture.
  4. When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside.
  5. Do not drop it and avoid heavy impacts at anytime.
  6. The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Responsible Party
LG Electronics USA
1000 Sylvan Avenue Englewood Cliffs
New Jersey United States 07632 (Phone: 201-472-2623)

RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Leave a Reply